[HARDWARE] Emailed Logs

John Price linux-guru at gcfl.net
Tue Sep 1 12:34:17 EDT 1998


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

I don't know how it does it.  I have several guesses, but I didn't write
the code, so I don't know.

On Tue, 1 Sep 1998, C Huffman wrote:

> Date: Tue, 01 Sep 1998 10:16:55 -0400
> From: C Huffman <cbhiii-rc5 at ic.net>
> Reply-To: hardware at lists.distributed.net
> To: hardware at lists.distributed.net
> Subject: Re: [HARDWARE] Emailed Logs
> 
> Thanks John,
> 
> I received 2 logs this morning, but not the third.
> 
> I check one of the PC's that successfully mailed it, and the log is still
> on the hard drive, which is fine, but how does the program know to wait
> another 10K before sending and send another? The log file is 55K right now.
> Does it start counting those 10K bytes when the client starts? (IE - a 45K
> log would have to wait until 55K to get sent)
> 
> Just trying to pin point its operation for better debugging and understanding.
> 
> Thanks.
> 
> At 11:49 PM 8/31/98 -0500, John Price wrote:
> >-----BEGIN PGP SIGNED MESSAGE-----
> >Hash: SHA1
> >
> >I'm using Win95 client v2.7100.417 and i386 Linux v2.7100.416 and email
> >logs work great.  Depending on how by you set the threshold and how fast
> >the computer is, it might be a few hours before you will get a log on the
> >mail.
> >
> >The U*NX clients will force an email log out everytime you stop the
> >client, but the Win95 client does not.  You just have to wait till enough
> >blocks have been checked before it sends a log.
> >
> >Later,
> >John
> >
> >On Mon, 31 Aug 1998, C Huffman wrote:
> >
> >> Date: Mon, 31 Aug 1998 23:27:49 -0400
> >> From: C Huffman <cbhiii-rc5 at ic.net>
> >> Reply-To: hardware at lists.distributed.net
> >> To: hardware at lists.distributed.net
> >> Subject: [HARDWARE] Emailed Logs
> >> 
> >> >Date: Mon, 31 Aug 1998 22:42:49 -0400
> >> >To: rc5 at lists.distributed.net
> >> >From: C Huffman <cbhiii-rc5 at ic.net>
> >> >Subject: Emailed Logs
> >> >
> >> >Help...
> >> >
> >> >Can someone help me with the emailed logs part of the client. I have
> >> everything programmed in but no logs are getting sent out email that I can
> >> see or have received. This would be nice since I have 3 remote units I'd
> >> like to keep tabs on. Does this option work? Or is there a help link
> >> somewhere?
> >> >
> >> >Thanks.
> >> >
> >> >>>> Message RESENT due to network problem <<<
> >> --
> >> To unsubscribe, send 'unsubscribe hardware' to
> majordomo at lists.distributed.net
> >> 
> >> 
> >
> >John Price <linux-guru at gcfl.net>
> >
> >PGP key at http://www.gcfl.net/~linux-guru/publickey.txt
> >
> >GCFL home page -> http://www.gcfl.net
> >
> >John's FreeDOS page -> http://www.gcfl.net/FreeDOS
> >
> >-----BEGIN PGP SIGNATURE-----
> >Version: PGPfreeware 5.0i for non-commercial use
> >Charset: noconv
> >
> >iQA/AwUBNetuxbR4GidzvvE7EQIfLgCfUj3L6vODX+1IA+MDOvlm6KNpQggAoO9P
> >3FOsmFHOvFApOIUcgiV1auXe
> >=vKH8
> >-----END PGP SIGNATURE-----
> >
> >--
> >To unsubscribe, send 'unsubscribe hardware' to
> majordomo at lists.distributed.net
> >
> >
> >
> --
> To unsubscribe, send 'unsubscribe hardware' to majordomo at lists.distributed.net
> 
> 

John Price <linux-guru at gcfl.net>

PGP key at http://www.gcfl.net/~linux-guru/publickey.txt

GCFL home page -> http://www.gcfl.net

John's FreeDOS page -> http://www.gcfl.net/FreeDOS

-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 5.0i for non-commercial use
Charset: noconv

iQA/AwUBNewT/LR4GidzvvE7EQJLYgCeN8TZFR76X/pV0ZnwYaGgrOSGE0gAoJL0
5LhDUoF70SNQYd/ReFFw6nWa
=Bfpa
-----END PGP SIGNATURE-----

--
To unsubscribe, send 'unsubscribe hardware' to majordomo at lists.distributed.net



More information about the Hardware mailing list