[Hardware] Client for FPGA

Elektron elektron_rc5 at yahoo.ca
Mon Aug 23 13:42:19 EDT 2004

On 24 Aug, 2004, at 00:16, Frederic Bastien wrote:

> thanks for your answer, I will try to do it when I have the time. 
> Meaby I
> can make that my projet for my graduate class.
> I have another question. The connection between the fpga and the 
> programm
> to tell with blok to calculate is included in the part that must be 
> coded?
> Or is there already something that do this?(I don't think so but in 
> case
> somebody have done one)

Serial or parallel port should be easy enough do on the FPGA side, but 
possibly not so easy to do on the client side, depending on how easy 
direct hardware access is in the particular OS.

USB support is possible too, but it'll be harder to implement on an 

- Purr

More information about the Hardware mailing list