[Hardware] Client for FPGA

jbass at dmsd.com jbass at dmsd.com
Mon Aug 23 15:00:47 EDT 2004


Elektron <elektron_rc5 at yahoo.ca>
> USB support is possible too, but it'll be harder to implement on an 
> FPGA.

Been there ... done that :)  ... was a 3 hour design to include on two
FPGA boards here.

Piece of cake using FT2232, or the earlier fifo chips in bit bang mode.
Use A channel as a JTAG port, and interface the B channel in fifo mode
to FPGA data pins.

John


More information about the Hardware mailing list