[Hardware] Fully unrolled RC5 on FPGA

[John L. Bass]

Gerald Richter <glassman1 at neonshadow.net> wrote:
> Erg, i've always been a not fan of kludges like that. They work, and 
> very well for some things, but just ugh. Gimme a full length PCI card 
> with a bridge chip, whatever other support logic is needed and sockets 
> for like 8 chips and i'm happy. I dunno, how big are the spartan 4? 
> Could we fit more spartan 3s in the space?

None of these devices which have a practical size are easily socketed.
Most are ball grid arrays (BGA), or fine pitch quad flat packs (QFP).
The price per performance doesn't favor a bunch of small fpga's, but
may well favor a few mid to large sized fpga's.

As for card chassis, server PC's are still the cheapest, and most usable
chassis ... far better than some VME kludge. A typical mid end PII or
PIII PC server motherboard has a bunch of slots, including a couple 64bit
3.3V PCI slots, can be had for small change. Some more interesting boat
anchors, like older high end servers, typically have a large number of
PCI slots (up to 12), including a large number of 64 bit slots.

It might not be unreasonable to make a card so that it can passively
occupy a 5V PCI slot (take power and mounting from it), but not interface
to the 5V PCI. Or to put a 5V tollerant CPLD on a 5V PCI card to pick
off ISA emulation I/O ports with a narrow (8/16) bit bus width, as an
interface to the fpga array. Or, use some older XC4K fpga's as the bridge
to the newer fast/cheap fpga's. 5V PCI capable XC4K parts frequent Ebay
for chump change, as do the CPLDs.

John