[PROXYPER] V319 PProxy-stuck ip address

DHS dx7 at jps.net
Mon Dec 11 17:50:43 EST 2000


I upgraded to the V319 Personal Proxy yesterday. Today at 1550 PST was my 
first try to upload completed keys. When I executed the ctrl+pause command, 
the pproxy attempted to connect to 206.109.64.186. This address responded 
with a 'connection_refused' response.

Connections were consistently refused for each of the next 19 attempts. The 
perproxy never attempted to communicate  with another "round-robin" server. 
My .ini file address for the keyserver is: us.v27.distributed.net.

Finally, I shut the perproxy down (ctrl+c), and restarted it. Then I issued 
the ctrl+pause command to connect. The perproxy linked up with a different 
server and appears to have properly updated.

Question1: What is the keyserver re-set mechanism of the perproxy?

Question2: Why does the perproxy seem to lock-up on a "suspected/reported 
busy" keyserver? (a ctrl+c reset was needed to get the perproxy to move to 
a new address).

Question3: Is this behavior indicative of a subtle virus I have not found 
yet (NAV2K)?

Question4: Or, is this just normal behavior in the final 10 minutes of a 
cycle (2350-0000)? I count 7 DNet servers coded to service "US." Are they 
getting swamped?

I would like to stay current with the DNetc code, but may have to go back 
to an earlier PerProxy version, yet, I have noticed this Non-Round-Robin 
behavior in V318 and V313 also.

Thank you,
Duncan


12/11/00 log snippet:

2000-12-11 23:52:34,*Signal*  Re-reading configuration.
2000-12-11 23:52:34,Doing .ini reload now.
2000-12-11 23:52:34,Verbosity set to: all (-1)
2000-12-11 23:52:34,Notice: connectivity mode is normal
2000-12-11 23:52:34,Notice: Loaded 0 ignoredip addresses from ini file
2000-12-11 23:52:34,Notice: Loaded 0 allowedip addresses from ini file
2000-12-11 23:52:34,Notice: Primary listener bound to (all devices):2064
2000-12-11 23:52:34,Notice: Test listener re-bound to (all devices):3064
2000-12-11 23:52:34,desII-in: limits adjusted to min 10, max 20
2000-12-11 23:52:34,csc-in: limits adjusted to min 10, max 20
2000-12-11 23:52:34,Status: Uplink needed... (hard-coded force)
2000-12-11 23:52:34,Status: Creating uplink (outgoing server) connection.
2000-12-11 23:52:40,Uplink: [1] connection to 206.109.64.186 changed state
2000-12-11 23:52:40,        from 0 (ESTNONE) to 1 (ESTCONNWAIT)
2000-12-11 23:52:42,Uplink: [1] Socket error; (WSAECONNREFUSED): The 
connection was refused
2000-12-11 23:52:42,Uplink: [1] Closed connection to 206.109.64.186.
2000-12-11 23:52:43,rc564 r=474/2900, d=2372/3000, 0.0 Mkeys/sec, tot=1967
2000-12-11 23:52:43,Status: rc564: Last uplink sent 0 and received 0
2000-12-11 23:52:43,Status: Uptime: 0.19:05:33, 2 listeners, 0 uplinks
2000-12-11 23:52:43,Status: 0 active clients (peak: 1, mean: 0.00)

2000-12-11 23:52:55,*Signal*  Re-reading configuration.
2000-12-11 23:52:55,Doing .ini reload now.
2000-12-11 23:52:55,Verbosity set to: all (-1)
2000-12-11 23:52:55,Notice: connectivity mode is normal
2000-12-11 23:52:55,Notice: Loaded 0 ignoredip addresses from ini file
2000-12-11 23:52:55,Notice: Loaded 0 allowedip addresses from ini file
2000-12-11 23:52:55,Notice: Primary listener bound to (all devices):2064
2000-12-11 23:52:55,Notice: Test listener re-bound to (all devices):3064
2000-12-11 23:52:55,desII-in: limits adjusted to min 10, max 20
2000-12-11 23:52:55,csc-in: limits adjusted to min 10, max 20
2000-12-11 23:52:55,Status: Uplink needed... (hard-coded force)
2000-12-11 23:52:55,Status: Creating uplink (outgoing server) connection.
2000-12-11 23:52:56,Uplink: [1] connection to 206.109.64.186 changed state
2000-12-11 23:52:56,        from 0 (ESTNONE) to 1 (ESTCONNWAIT)
2000-12-11 23:52:58,Uplink: [1] Socket error; (WSAECONNREFUSED): The 
connection was refused
2000-12-11 23:52:58,Uplink: [1] Closed connection to 206.109.64.186.
2000-12-11 23:52:59,rc564 r=474/2900, d=2372/3000, 0.0 Mkeys/sec, tot=1967
2000-12-11 23:52:59,Status: rc564: Last uplink sent 0 and received 0
2000-12-11 23:52:59,Status: Uptime: 0.19:05:49, 2 listeners, 0 uplinks
2000-12-11 23:52:59,Status: 0 active clients (peak: 1, mean: 0.00)

2000-12-11 23:53:13,*Signal*  Re-reading configuration.
2000-12-11 23:53:13,Doing .ini reload now.
2000-12-11 23:53:13,Verbosity set to: all (-1)
2000-12-11 23:53:13,Notice: connectivity mode is normal
2000-12-11 23:53:13,Notice: Loaded 0 ignoredip addresses from ini file
2000-12-11 23:53:13,Notice: Loaded 0 allowedip addresses from ini file
2000-12-11 23:53:13,Notice: Primary listener bound to (all devices):2064
2000-12-11 23:53:13,Notice: Test listener re-bound to (all devices):3064
2000-12-11 23:53:13,desII-in: limits adjusted to min 10, max 20
2000-12-11 23:53:13,csc-in: limits adjusted to min 10, max 20
2000-12-11 23:53:13,Status: Uplink needed... (hard-coded force)
2000-12-11 23:53:13,Status: Creating uplink (outgoing server) connection.
2000-12-11 23:53:14,Uplink: [1] connection to 206.109.64.186 changed state
2000-12-11 23:53:14,        from 0 (ESTNONE) to 1 (ESTCONNWAIT)
2000-12-11 23:53:16,Uplink: [1] Socket error; (WSAECONNREFUSED): The 
connection was refused
2000-12-11 23:53:16,Uplink: [1] Closed connection to 206.109.64.186.
2000-12-11 23:53:17,rc564 r=474/2900, d=2372/3000, 0.0 Mkeys/sec, tot=1967
2000-12-11 23:53:17,Status: rc564: Last uplink sent 0 and received 0
2000-12-11 23:53:17,Status: Uptime: 0.19:06:07, 2 listeners, 0 uplinks
2000-12-11 23:53:17,Status: 0 active clients (peak: 1, mean: 0.00)

........

2000-12-11 23:56:54,*Signal*  Re-reading configuration.
2000-12-11 23:56:54,Doing .ini reload now.
2000-12-11 23:56:54,Verbosity set to: all (-1)
2000-12-11 23:56:54,Notice: connectivity mode is normal
2000-12-11 23:56:54,Notice: Loaded 0 ignoredip addresses from ini file
2000-12-11 23:56:54,Notice: Loaded 0 allowedip addresses from ini file
2000-12-11 23:56:54,Notice: Primary listener bound to (all devices):2064
2000-12-11 23:56:54,Notice: Test listener re-bound to (all devices):3064
2000-12-11 23:56:54,desII-in: limits adjusted to min 10, max 20
2000-12-11 23:56:54,csc-in: limits adjusted to min 10, max 20
2000-12-11 23:56:54,Status: Uplink needed... (hard-coded force)
2000-12-11 23:56:54,Status: Creating uplink (outgoing server) connection.
2000-12-11 23:56:55,Uplink: [1] connection to 206.109.64.186 changed state
2000-12-11 23:56:55,        from 0 (ESTNONE) to 1 (ESTCONNWAIT)
2000-12-11 23:56:57,Uplink: [1] Socket error; (WSAECONNREFUSED): The 
connection was refused
2000-12-11 23:56:57,Uplink: [1] Closed connection to 206.109.64.186.
2000-12-11 23:56:58,rc564 r=474/2900, d=2372/3000, 0.0 Mkeys/sec, tot=1967
2000-12-11 23:56:58,Status: rc564: Last uplink sent 0 and received 0
2000-12-11 23:56:58,Status: Uptime: 0.19:09:48, 2 listeners, 0 uplinks
2000-12-11 23:56:58,Status: 0 active clients (peak: 1, mean: 0.00)

2000-12-11 23:57:03,Status: Shutting down listeners...
2000-12-11 23:57:03,Status: Closing client connections...
2000-12-11 23:57:03,Status: Closing uplink connections...
2000-12-11 23:57:03,*Break*  Initiating shutdown.
2000-12-11 23:57:03,Shutting down contests.
2000-12-11 23:57:03,Proxy shutdown complete.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.distributed.net/pipermail/proxyper/attachments/20001211/0d4484ae/attachment.htm


More information about the proxyper mailing list