Stanley Appel s.appel at bigfoot.com
Tue Mar 21 23:00:00 EST 2000

The same problem here.
I "fixed" it with putting the following lines in the .ini file:


----- Original Message -----
From: "Mike Morrow" <mike at micratek.com>
To: <proxyper at lists.distributed.net>
Sent: dinsdag 21 maart 2000 22:16
Subject: Re: Re[2]: [PROXYPER] Win9x

> >I'll always think it's a bug). When connect mode sets to "normal" client
> >not use "flush-workunit-threshold" at all. Try this:
>It's a bug. The flush threshold uses the value of the fetch threshold
>currently. This will be corrected in the next release.

That's not it, either.  I set:


and it still does not send in.

I think I overlayed whatever I had with this new one.  I hope a new release
comes out quickly.

Does no one even run a short block though this stuff to see if it works
before release????  I could certainly test Win32/NT4 and Win2K sending to a
perproxy.  That would not be difficult to do and might save others the
problems.  I would only need early access to the proposed release.  It
seems this configuration is not currently being tested much or at all.

If there is no testing going on, I would expect that lots of folks will
quickly decide that this is not worth the trouble for, essentially, no

Mike Morrow

     _/      _/   _/   _/  _/    _/_/_/   From the computer room of:
    _/_/  _/_/   _/   _/ _/     _/       Mike/W5MDM (was AB6NN)
   _/ _/_/ _/   _/   _/_/      _/_/     Mike at MicraTek.com
  _/  _/  _/   _/   _/  _/    _/       34°10'35.8"N, 94°16'47.6"W
_/      _/   _/   _/    _/  _/_/_/   808.8 feet elevation, MSL
AOL/IM: W5MDM -- ICQ: 5056515  Homepage: http://www.micratek.com
The legal system is the dark shadow of justice.

To unsubscribe, send 'unsubscribe proxyper' to
majordomo at lists.distributed.net

To unsubscribe, send 'unsubscribe proxyper' to majordomo at lists.distributed.net

More information about the proxyper mailing list