[PROXYPER] too big blocks given to client?

Heinz Saathoff hsaat at bre.ipnet.de
Fri May 4 17:42:20 EDT 2001


Hi,


I don't know if this is a proxy or client problem. I've fetched blocks for
a stand-alone PC  with the command
 
    dnetc -fetch -inbase in -b 1000

This should load 1000 work units to in.rc5 which I then move by floppy to
the stand alone PC. The client on the stand alone PC tells that it has 1000
work units in xxx blocks. But the proxy tells me that it has handed out
much more blocks during this fetch. In the logfile I saw that it has handed
out blocks with rc564x32:

05/04/01 07:16:38,rc564 r=10729/12000, d=1206/5000, 3.7 Mkeys/sec, tot=48471
05/04/01 07:16:38,ogr r=20/20, d=0/3, 0.0 Mnodes/sec, tot=0 stubs
05/04/01 07:16:38,Status: Uptime: 32.00:38:35, 2 listeners, 0 uplinks
05/04/01 07:16:38,Status: 0 active clients (peak: 3, mean: 0.00)
05/04/01 07:17:22,Client: Accepted connection from 192.168.0.3:3015
05/04/01 07:17:23,Client: 192.168.0.3 (client ver: 463) is connecting
05/04/01 07:17:23,Client: 192.168.0.3 <-- rc564 x 16 2ae0078a:f0000000 
05/04/01 07:17:23,Client: 192.168.0.3 <-- rc564 x 7 2ae0078a:00000000 
05/04/01 07:17:23,Client: 192.168.0.3 <-- rc564 x 7 2ae00789:00000000 
05/04/01 07:17:24,Client: 192.168.0.3 <-- rc564 x 7 2ae00788:00000000 
05/04/01 07:17:24,Client: 192.168.0.3 <-- rc564 x 32 2ae0078b:f0000000 
05/04/01 07:17:24,Client: 192.168.0.3 <-- rc564 x 32 2ae0078d:f0000000 
05/04/01 07:17:24,Client: 192.168.0.3 <-- rc564 x 32 2ae0078f:f0000000 
05/04/01 07:17:24,Client: 192.168.0.3 <-- rc564 x 32 2ae00791:f0000000 
05/04/01 07:17:24,Client: 192.168.0.3 <-- rc564 x 32 2ae00793:f0000000 
05/04/01 07:17:24,Client: 192.168.0.3 <-- rc564 x 32 2ae00795:f0000000 
05/04/01 07:17:24,Client: 192.168.0.3 <-- rc564 x 32 2ae00797:f0000000 
05/04/01 07:17:25,Client: 192.168.0.3 <-- rc564 x 32 2ae00799:f0000000 
05/04/01 07:17:25,Client: 192.168.0.3 <-- rc564 x 32 2ae0079b:f0000000 
05/04/01 07:17:25,Client: 192.168.0.3 <-- rc564 x 32 2ae0079d:f0000000 
05/04/01 07:17:25,Client: 192.168.0.3 <-- rc564 x 32 2ae007a2:90000000 
05/04/01 07:17:25,Client: 192.168.0.3 <-- rc564 x 32 2ae007a4:90000000 
05/04/01 07:17:25,Client: 192.168.0.3 <-- rc564 x 2 29112710:10000000 
05/04/01 07:17:25,Client: 192.168.0.3 <-- rc564 x 2 291125a8:a0000000 
05/04/01 07:17:25,Client: 192.168.0.3 <-- rc564 x 1 291125a8:10000000 
05/04/01 07:17:26,Client: 192.168.0.3 <-- rc564 x 1 291125a5:40000000 
05/04/01 07:17:26,Client: 192.168.0.3 <-- rc564 x 3 291125a4:00000000 
 . . . .
05/04/01 07:17:44,Client: 192.168.0.3 <-- rc564 x 32 2ae00d64:b0000000 
05/04/01 07:17:44,Client: 192.168.0.3 <-- rc564 x 32 2ae00d66:b0000000 
05/04/01 07:17:45,Client: 192.168.0.3 <-- rc564 x 32 2ae00d68:b0000000 
05/04/01 07:17:45,Client: 192.168.0.3 <-- rc564 x 24 2ae00d6a:b0000000 
05/04/01 07:17:45,Client: 192.168.0.3 <-- rc564 x 16 2ae007d3:f0000000 
05/04/01 07:17:45,Client: 192.168.0.3 <-- rc564 x 1 2ae007d4:f0000000 
05/04/01 07:17:45,Client: 192.168.0.3 <-- rc564 x 7 2ae007d5:00000000 
05/04/01 07:17:45,Client: 192.168.0.3 has ended communications.
05/04/01 07:17:45,Client: Closing client connection with 192.168.0.3
05/04/01 07:21:40,rc564 r=7248/12000, d=1206/5000, 3.6 Mkeys/sec, tot=48471

So why does the proxy give this huge size blocks to the client? The maximum
block size the client should get is rc564 x 8!
BTW, this only happens when I do this manual fetch. The other clients that
fetch a few work units on the local net never cause this problem.

Any ideas?


-- 
Heinz Saathoff, Bremen, Germany
E-Mail : hsaat at bre.ipnet.de
--
To unsubscribe, send 'unsubscribe proxyper' to majordomo at lists.distributed.net



More information about the proxyper mailing list